About a year ago I bought a card reader from Transcend for 120 rubles (and even in the cheapest store, where prices for memory cards differ by half), it only supports SD, MicroSD, M2 and MMC. I checked https://jiji.ng/uyo/mobile-phones/apple-iphone-6 only on the SD card, everything also works without any complaints, although a couple of times the card was not visible, perhaps due to the fact that I did not completely put it into the slot. I tested three formats: SD, MicroSD (aka T-Flash) and Memory Stick Pro Duo. The main advantage of this card reader is the support of a large number of different memory cards. The main plus can be given to it for the multi-readability of different memory cards and the low price (only fifty rubles). 3) Connector on the right side. There are 4 card slots in the card reader: The transfer speed is really USB 2.0, there are no complaints about it, it transfers files like any other good branded card reader. 4) Connector located at the bottom of the card reader. Alas, I haven’t checked it yet, I didn’t have time, but I think it’s also working. For Memory Stick/Memory Stick Pro/Memory Stick Pro Duo/Memory Stick Duo. For T-Flash (MicroSD) memory cards. The card reader has a built-in indicator that, when connected to the USB port and a memory card is simultaneously inserted into it, turns red. 1) On the left side, which is the top one. 2) Also on the left side, but lower. For SD/MMC/RS MMC/miniSD memory cards. In size, one and a half times more than a standard flash drive, you can see the approximate dimensions on the website and bonus Also tested, works. Good afternoon everyone. The disadvantage is that the card reader does not read 2 or more cards at the same time.
USB 2.0 card reader SD/MMC/RS MMC/Micro SD/Micro MS (M2)/MS CCR-7963
But now I conducted this experiment on Transcend, it turned out that he had the same problem. Today I would like to tell you about this card reader from TinyDeal.com. Works flawlessly, everything is fine. For Micro MS (M2) cards.